Interior Acrylic Emulsions
Formulated from dead matte to high-traffic satin sheens. Provides 130 square feet per litre across two coats, resisting household scuffs and repeated scrub cycles without burnishing.
Weather-Resistant Elastomeric
Pure acrylic resin reinforced against monsoon downpours, thermal movement, and persistent UV fading. Micro-porous film lets trapped masonry moisture escape while repelling driving rain.
Alkali-Resistant Primers
Deep-penetrating sealers formulated for fresh cement plaster and cured brickwork. Neutralizes surface efflorescence, seals porosity, and anchors topcoats against premature chalking.
Four Steps to Permanent Adhesion
Moisture Assessment
Efflorescence Removal
Penetrating Undercoat
Dual Topcoat Recoat
Verify substrate moisture levels fall under 12 percent before application. Masonry requires a minimum twenty-eight day initial cure to prevent chemical blistering.
Scrape loose aggregate and wire-brush alkali salts from cured plaster. Wash with clean water and allow complete air dry prior to sealing.
Apply one unthinned coat of alkali-resistant primer with an 18-inch woven roller. Allow six full hours for the polymer core to crosslink.
Lay down two consecutive finish coats with four-hour intermediate cure windows. Maintain wet edges across broad wall spans to prevent roller tracking.
Technical Data Sheets on Request
Request full mill-thickness data, resin certificates, or volume gallon batch allocations directly from our trade dispatch team.